404 Not Found
The requested URL ‚/videostream.cgi?user=Benutzername&pwd=Passwort‘ was not found on this server.
Benutzername und Passwort habe ich von admin über user bis guest alle probiert, sieht für mich so aus als ob der Zugriff auf den Stream auf der 6011’er anders zu bewerkstelligen ist. Leider haben meine Suchen im Forum und über Google keine brauchbaren Ergebnisse gebracht.
Hat von Euch jemand das schon realisiert? Ich bin für Tipps dankbar.
schon ein paar Posts von Dir gelesen Vielen Dank Deine Info - da hätte ich wohl vor meinem Kauf besser mal den Vertrieb gefragt. Bin einfach davon ausgegangen, dass das bei der 6011er genauso geht wie bei den anderen.
Hallo, diese CGI Befehle für die IN-6011 habe ich von INSTAR bekommen.
VIDEO
rtsp://IP-Address:RTSP-Port/11 :: VLC Stream
http://admin:instar@IP-Address:Port/iphone/11 :: Quicktime Stream
http://admin:instar@IP-Address:Port/snap.jpg :: Snapshot
PTZ
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=right :: Moves continuously right
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=left :: Moves continuously left
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=up :: Moves continuously up
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=down :: Moves continuously down
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=stop :: Stops moving camera-head
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=right :: Moves one step right
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=left :: Moves one step left
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=up :: Moves one step up
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=down :: Moves one step down
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=home :: Go to Center Position
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=hscan :: Scan horizontal
http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=vscan :: Scan vertical
IMAGE
http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr :: Sets the Image Parameter
You can set the following parameters:
brightness :: [0 - 255] the bigger the value the brighter the image
lumivalue:: [0 - 255]
saturation :: [0 - 255] the bigger the value the more saturation the image has
contrast :: [0 - 255] the bigger the value the more contrast the image has
hue :: [0 - 127] the bigger the value the more hue the image has
flip :: (on , off) flips the image
mirror :: (on , off) flips the image
scene :: (auto , indoor , outdoor) sets the white balance mode
http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr&-brightness=0&-saturation=0&-contrast=0&-hue=0&-flip=off&-mirror=off&-scene=auto
IR-LED
http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=auto :: Sets IR LED's to auto mode
http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=open :: Sets IR LED's always active
http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=close :: Sets IR LED's always inactive
POSITIONSSPEICHER
http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=1&-number=[0-7] :: set a position
http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=0&-number=[0-7] :: unset a position
http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=goto&-status=1&-number=[0-7] :: goto to a set position
Helligkeitschwankungen
http://x.x.x.x/cgi-bin/hi3510/param.cgi?cmd=setimageattr&-lumiswitch=off